Rethink Robotics Sawyer Скачать руководство пользователя страница 158 | Manualshive

Страница: 158 / 220

Rethink Robotics Sawyer Скачать руководство пользователя страница 158

151

Intera 5.3

Information for Integrators

Risk assessment

Sawyer is supplied for assembly with other equipment to form a complete machine and is not itself
a complete machine. Integrators must therefore perform an application risk assessment based on
general shop safety rules and safety standards that considers the installation, surroundings, work-
force training and competence, and the general safety culture. The purpose of the risk assessment
is to ensure that hazards posed to users are eliminated or minimized in accordance with occupa-
tional health & safety requirements established by local regulatory authorities. Guidance on the risk
assessment process may be found in the following standards (non-exhaustive):

•

ISO 10218-2:2011 Robots and robotic devices - Safety requirements - Part 2:
Industrial robot systems and integration

•

RIA TR R15.306-2014 Technical Report for Industrial Robots and Robot Systems
- Safety Requirements, Task-based Risk Assessment Methodology.

•

ISO 12100:2010 Safety of machinery - General principles for design - Risk
assessment and risk reduction

•

ANSI B11.0-2010 Safety of Machinery; General Requirements & Risk Assess-
ment.

The risk assessment shall take into account all potential contact between an operator and the robot
during normal use and foreseeable misuse. The operator's neck, face and head shall not be
exposed to contact.

The risks associated with collaborative operation of Sawyer are reduced to levels as low as reason-
ably practicable through a combination of inherently safe design measures employed by Rethink
Robotics and safe practices/risk assessments carried out by integrators and end users. Any resid-
ual risks remaining with the robot prior to installation are communicated to integrators and end
users through this document. If the integrator’s risk assessment for the specific application deter-
mines there is an unacceptable level of risk, additional risk reduction measures must be applied.

«
...
156
157
158
159
160
...
»

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов