Rethink Robotics Sawyer Скачать руководство пользователя страница 131 | Manualshive

Страница: 131 / 220

Rethink Robotics Sawyer Скачать руководство пользователя страница 131

124

Intera 5.3

TCP/IP

TCP/IP

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you
see the Online User Guide at:

mfg.rethinkrobotics.com/intera.

The Rethink Robotics support page

is here:

Rethink Support.

Transmission Control Protocol/Internet Protocol, better known as TCP/IP, is the suite of
communications protocols used to connect hosts on the Internet, over Ethernet or wifi. Built into the
UNIX operating system, it is used in Intera 5 to enable Sawyer to communicate with work cell
devices such as PLCs, barcode readers, and cameras.

TCP/IP allows for more flexible communication than is possible with Modbus devices because it
allows Sawyer to send and receive arbitrary messages.

Definitions

IP address -- A unique identifier for every workstation in the world. The address is a four byte value,
e.g., 192.168.1.52.

TCP -- Responsible for verifying the correct delivery of data from client to server. Can detect errors
or lost data and trigger retransmission until data is correctly and completely received.

TCP Socket -- A socket is an endpoint of a TCP connection, identified with an IP address and a
port number. A port number is a semi-arbitrary way to divide up different connections to the same
IP address. A useful analogy: if an IP address is like a telephone number, the port number is the
phone's extension.

«
...
129
130
131
132
133
...
»

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов