Rethink Robotics Baxter Скачать руководство пользователя страница 38

Страница: 38 / 183

Intera 3.2

Training and Managing Tasks

Training a Pick Using Vision

In some situations you will need Baxter to visually search for and recognize an object before picking
it. Train a Pick using vision when:

•

You want Baxter to locate an object that varies in location and/or orientation by
more than 0.2 inches (0.5 cm) each time.

•

You want Baxter to pick from a continuously moving conveyor. (Note: A conveyor
that has been indexed would not require vision.)

Important Note:

Vision

only works for vertical Picks

. Picks are set to non-vertical by default, but

you can take a Pick action that is already close to vertical and make it truly verti-
cal using the Snap to Vertical check box:

1. Highlight the (nearly vertical) Pick on the Task Map and press

OK on the Navigator.

Baxter displays the Pick's Modify panel.

2. Scroll to the icon

and press OK.

3. Select the Advanced Settings icon

on the Screen.

Baxter displays the Advanced Settings Screen.

4. Check the Snap to Vertical check box, the select Done.

5. Press the Back button on the Navigator to return to the Task

Map and select the Pick.

It will now be a vertical Pick.

Содержание Baxter
























































































































































































Результаты поиска

Содержание Baxter

Отзывы:

Бренды по названию

Популярные бренды

Rethink Robotics Baxter, Руководство пользователя

Результаты поиска

Содержание Baxter

Отзывы:

Бренды по названию

Популярные бренды