background image

Model: TM101

EU Importer

Name

Germany Retevis Technology GmbH

Address

Uetzenacker 29,38176 wendeburg

 Display button description

“▲”Up button

“▼”Down button

“■”Function key / shift key

    “●”Reset button / exit button.

 Remote control button description

Start, time, reset.

 When the responder is not in use, please turn off the power of the responder through the 

     back switch to extend the battery life. Please remove the battery when not in use for a long

     time.

 

Answer time-

F1

1. Press [Function Key ■] to enter the system menu, turn to [F1] and press [Function 

    Key ■] again to enter the setting mode. The default flashing time will display the

    current answering time;

2. Set the answer time by [Up ▲ ▲ / Down ▼], [Function Key ■] Displacement cursor, 

    the unit is "second", set the range "1-999", short press [Reset button ●] to exit the 

    setting mode after setting is completed. 

3. After the successful answer, press the [Timer] button on the remote control, the 

    display will display the specified answer time, and start counting down.

Learning number-

F2

1. Answerer number setting

    1) Short press [Function Key ■] to enter the system menu, turn to [F2] and press

        [Function Key ■] again to enter the setting mode. The default flashing display

        shows “01”;

    2

Set the number by [Up ▲/Down ▼], [Function Key ■] Displace the cursor, and set 

        the range “1-32”. After adjusting to the desired number, press and hold the 

        responder button for about 2 seconds until the responder flashes. The blue light 

        starts to match the host code. After the success, the responder flashes red light. 

        After the setting is completed, press [Reset button ●] to exit the setting mode.

2. Remote control code

    1) Short press [Function Key ■] to enter the system menu, turn to [F2] and press 

        [Function Key ■] again to enter the setting mode. The default flashing display 

        shows “01” ;

    2) Set the number by [Up ▲/Down ▼], [Function Key ■] Displace the cursor, after 

        adjusting to “00”, press any button of the remote control for 2 seconds or so. After

        successful, it will broadcast “Beep” remote control. When the device flashes red, 

       

 the code is successful. After setting, press [Reset button ●] to exit the setting mode.

Local ID-

F3

1. Short press [Function Key ■] to enter the system menu, turn to [F3] and press 

    [Function Key ■] again to enter the setting mode. The default flashing display shows

    “01” ;

2. Set the number by [Up ▲/Down ▼], [Function Key ■] Displace the cursor, set the 

    range “1-15”, press [Reset Key ●] after setting to exit the setting mode; Note: You 

    need to relearn the number after changing the ID number. Do not change the local 

    ID without special circumstances.

Answer mode-

F4

1. Normal mode-

1

    Afte

r pressing

 the [Start] button, the player directly answers. No 3 seconds 

    countdown reminder, no voice reminder, and no foul judgment.

    1

Short press [Function Key ■] to enter the system menu, turn to [F4] and press 

          [Function Key ■] again to enter the setting mode. The default flashing mode

          displays the current answer mode.

    2

Set the number to “1” by pressing [Up ▲/Down ▼], and press [Reset] ● to exit 

          the setting mode after setting.

2. Voice mode

2

    Press [Start] to start the 3 second countdown, and there is a voice reminder. In 3 

    seconds, the answer is considered a foul and needs to be restarted.

    1) Short press [Function Key ■] to enter the system menu, turn to [F4] and press 

        [Function Key ■] again to enter the setting mode. The default flashing mode 

        displays the current answer mode.

    2) Set the number to “2” by pressing [Up ▲/Down ▼], and press [Reset] ● to 

        exit the setting mode after setting.

3. Elimination mode

3

    Press [Start] to start the 3 second countdown, and there is a voice reminder, 3 

    

seconds to answer is considered a foul, but does not affect other players continue

    to answer, until someone successfully replies, or everyone fouls, or when the

    time is up, the answer is over The winner is a green light, the fouler is a red light,

    and the loser does not light up.

    1) Short press [Function Key ■] to enter the system menu, turn to [F4] and press 

        [Function Key ■] again to enter the setting mode. The default flashing mode 

        displays the current answer mode.

    2) Set the number to “3” by pressing [Up ▲/Down ▼], and press [Reset] ● to exit

        the setting mode after setting.

Answer time-

F5

After pressing the [Start Key] 3 seconds countdown, the effective time of the 

player's answer is more than the answer time, which is regarded as a waiver.

1) Short press [Function Key ■] to enter the system menu, turn to [F5] and press

    [Function Key ■] again to enter the setting mode. The default flashing screen 

    will display the current answering time;

2) Set the time by the [Up ▲/DOWN] button, the range is “0-999”. After the setting

    is completed, press the [Reset button ●] to exit the setting mode.

Set channel-

F6

Se

t the communication channel between the responder and the host. When the 

responder is not sensitive, try changing the host channel to correct it. After 

changing the host channel for 10 seconds, the code responder will flash three 

lights and automatically match the host channel. After the match is successful, 

the responder light will go out and enter the standby state. If a responder does 

not match the host, it will automatically enter the low-power mode. You need to 

manually press the responder to wake up and re-match the channel.

1) Press [Function Key ■] to enter the system menu, turn to [F6] and press 

    [Function Key ■] again to enter the setting mode. The default blinking screen

    displays the current channel.

2) Set the time by the [Up ▲/DOWN] button, the range is “0-15”. After the setting 

    is completed, press the [Reset button ●] to exit the setting mode.

 Intelligent

Responder User Manual

1

2

Henan Eshow Electronic Commerce Co., Ltd

Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, 

        Zhengzhou, Henan, China

Отзывы: