10 End of the lease contract
At the end of the lease contract, you have to return the machine to the manufacturer. Follow the
steps below to pack the machine.
1.
Disconnect the machine from the mains power supply.
2.
Let the machine cool down for 6 hours.
3.
Remove the tube from the ethanol jerrycan.
4.
Store or dispose of the ethanol according to local laws and regulations. Also refer to the
Material Safety Data Sheets on page 23.
Do not return ethanol to the manufacturer. Ethanol is highly explosive and can only
be shipped under specific conditions.
5.
Pack the machine in its original packaging.
6.
Contact the manufacturer for the return shipment of the machine.
Restrain
End of the lease contract 21