ML6 - Sing
le Room PIR Alarm
with Remote Control
Installa
tion and Operating Instructions
T
hese instructions should be retained in a safe place for future reference.
INTR
ODUCTION
T
he Alarm can be either wall mounted using the
bracket supplied or used freestanding for
portable use.
The Remote Control is used to ARM and DISARM
the system. The Remote Control operates using
Infra Red so it must be pointing directly at the PIR
Alarm to function.
A Passive Infra-Red (PIR) detector is designed to
detect movement in an area by detecting changes
in infra-red radiation levels caused for example
when a person/animal moves within the devices
field of vision.
The system has 2 operating modes: ALARM and
CHIME. Chime Mode is a low security feature
that will produce a door-chime sound when the
alarm is triggered. In Alarm Mode the device will
produce a constant high volume alarm sound
when triggered.
Saf
ety:
Al
ways follow the manufacturers advice
when using power tools; steps, ladders etc. and
wear suitable protective equipment (e.g. safety
goggles) when drilling holes etc.
Before drilling holes in walls, check for hidden
cables and pipes, the use of a cable/pipe locater
may be advisable if in doubt.
The use of ear protection is advisable when
working in close proximity to the Siren due to the
high sound level produced by this device.
Do not use in w
et locations.
INSTALLATION
T
he alarm is designed to be wall mounted with the
ball and socket mount (included).
The ball and
socket mount will provide the flexibility to aim the
motion sensor in a particular direction.
1. Select y
our desired location for the alarm, such
as the corner of a room.
This will provide
maximum coverage.
Note: T
he sensor has a 6m. detection zone,
with approximate angles of 110° horizontal
and 70° vertical.
Recommended installation
height is 1.8 - 2.4m.
