23
• Close the oven. Select the "bottom heat" heating type and set the temperature
control to 50 ° C.
• After approx. 30 minutes switch off the oven and disconnect it from the mains.
Remove softened food residues with a cleaning cloth.
• In case of burnt-on soiling please take note of the previous cleaning instructions.
Caution!
Do not use cleaning products containing abrasive materials for the
cleaning and maintenance of the glass front panel.
12. Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance is
switched off before replacing the bulb.
Set all control knobs to the position”0”and disconnect the mains plug,
unscrew and wash the lamp cover and then wipe it dry.
unscrew the light bulb from the socket, replace the bulb with a new one-a high
temperature bulb(300
℃
)with the following parameters:
Voltage230V
Power 25W
Thread E14.
Do not use any other type of bulb.
Screw the bulb in, making sure it is properly inserted into the ceramic socket.
Screw in the lamp cover.
No guarantee is given for lamps.
13. Door removal
(As shown figure 5)
In order to obtain easier access to the oven
chamber for cleaning, it is possible to remove the
door. To do this, tilt the safety catch part of the
hinge upwards. Close the door lightly, lift andpull it
out towards you .In order to fit the door back on to
the cooker , do the inverse. When fitting, ensure
that the notch of the hinge holder. Afterthe door is
fitted to the oven, the safety catch should be
carefully lowered down again. lf the safety catch is
not set it may cause damage to the hinge when
closing the door.
14. Removal of the internal glass
panel
Unscrew and unfasten the bracket latch that is in the
corner at the top of the door .Nexttake out the glass
from the second blocking mechanism and remove.
After cleaning, insert and block the glass panel, and
screw in the blocking mechanism.As shown figure (6)
Содержание DIGI SET 8 GLAS PP
Страница 58: ...Rating label ...
