Respekta DIGI SET 8 GLAS PP, Руководство пользователя и инструкции по установке

Страница: 33 / 58

4

T
his appliance complies with all
current European safety legislation.
We do wish to emphasize that this
compliance does not remove the fact
that the appliance surfaces will
become hot during use and retain heat
after operation.
Child Safety

W
e strongly recommend that babies
and young children are prevented
from being near to the appliance and
not allowed to touch the appliance at
any time.

I
f it is necessary for younger family
members to be in the kitchen, please
ensure that they are kept under close
supervision at all times.
General Safety

T
his appliance is not intended for use
by persons (including children) with
reduced physical sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.

D
o not place heavy objects on the
oven door or lean on the oven door
when it is open, as this can cause
damage to the oven door hinges.

D
o not place pans or baking trays
directly on the base of the oven cavity,
or line it with aluminum foil.

D
o not allow electrical fittings or
cables to come into contact with areas
on the appliance that get hot.

D
o not use the appliance to heat the
room it is located in or to dry clothing.

D
o not install the appliance next to
curtains or soft furnishings.

D
o not attempt to lift or move cooking
appliances by using the oven door or
handle, as this may cause damage to
the appliance or result in injury to the
person lifting the appliance.
2. Installation of the Hob
Installing the cooker
The kitchen area should be dry and aired and equipped with efficient ventilation. When
installing the cooker, easy access to all control elements should be ensured.
 This is a Y-type design built-in cooker, which means that its back wall and one side wall
can be placed next to a high piece of furniture or a wall .Coating or veneer used on
fitted furniture must be applied with a heat-resistant adhesive (100
℃
).This prevents
surface deformation or detachment the coating.
 Hoods should be installed according to the manufacturer’s instructions.
1. Assembly of Ceramic cooker
hob
(As shown figure 1)
 Make an opening with the dimensions
given in the diagram for the hob to be
mounted on the worktop.
 Check seal for perfect fit and overall
cover. Lower the electric hob into place
and align correctly.