Precautions and Warnings
Requirement: If anyone should avoid usage of the product
Taking Care of Your Headset
•
Always store the headset disconnected from the hearing instrument and safely protected
•
Avoid storage at extreme temperatures (above 113 ºF / 45 ºC – including direct sunlight – or below
14 ºF/-10 ºC). This can shorten battery life and may affect operation. High temperatures may also
degrade performance.
•
Do not expose the headset to rain or other liquids
Driving
•
Using a mobile phone while driving can distract you and increase the likelihood of an accident. If
driving conditions demand it (such as bad weather, high traffic density, presence of children in the
car, difficult road conditions), pull off the road and park before making or answering calls. Also, try to
keep conversations short and do not make notes or read documents.
Warning:
•
Do not wear the headset in mines or other explosive areas, unless those areas are certified for use
with battery powered equipment.
Batteries and Product Disposal
•
Do not expose the headset batteries to heat
•
Dispose of the product and/or batteries according to local standards and regulations
Page 13
Glossary
Bluetooth®
is a radio technology that connects devices, such as mobile phones and headsets, without wires
or cords over a short distance. For more information go to
www.bluetooth.com
Handset
is your mobile phone or desk phone
Pairing
creates a unique and encrypted link between two Bluetooth® devices and lets them communicate
with each other. Bluetooth® devices will not work if the devices have not been paired.
PIN
is a code that you enter on your mobile phone to pair it with your headset. This makes your phone and
the headset recognize each other and work together automatically.
Voice dialling tag
is a name or phrase you record onto your mobile phone. This enables you to dial a
specific person by repeating the voice dialling tag.
Page 14
Troubleshooting
Symptom
Cause
Possible remedy
LED not on when
charging headset
•
Cables not connected correctly
•
Headset not used for a long time
•
Connect cables correctly and
plug in power supply
•
Charge headset. After approx.
half an hour the LED will turn
on
No sound in headset
•
Headset not paired with phone
•
Headset connected to two other phones
•
Headset not charged
•
Pair headset with phone
•
Position phone close to
headset