31
i
Cleaning the receiver tubes and domes
The receiver tube and the receiver dome should be cleaned regularly. Use a damp cloth to clean
the receiver tube and receiver dome on the outside. Do not use water when you are cleaning the
receiver tubes or the receiver domes. This process is also used to clean the UP receiver mould.
Please see instruction on page 30 or 31 for how to change the wax guard filter.
i
Cleaning RIE or moulds
1. Separate the mould from the receiver tube.
2. Clean the RIE mould using a mild soap, and rinse with lukewarm
water.
3. After cleaning, dry RIE moulds thoroughly and remove any
residual water and debris from the tubing utilising an air bulb and
wire loop.