RE656_Helix-Compatible_HeliPAD_Instructions.doc
Page 1 of 4
26-Feb-15
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Installation Guide
RE656 CryptiX
™
-Compatible Helipad™
Features
•
Secure, 4 to 10 digit code to disarm
•
1-button arming
•
2-way RF, Shows system status
•
Mounts on wall via VHB® tape, or screws
•
Low Battery indication
•
1-2 year battery life
Enrollment
•
Place panel into Bluetooth enrollment mode.
•
Hold the pair button on the side of Helix for 3 seconds (until it
beeps).
•
Place Helipad into Bluetooth enrollment mode by following the below
steps.
•
To configure the Helipad, log into the web based dealer portal
Installation
•
Place Helipad near exit or entry doors. Use either the VHB tape or a
mounting screw (#4 or #6) to mount the Helipad in place
Mounting hole
Press the Helipad menu
button to enter the
settings menu.
Press the select button
to enroll the Helipad.
Helix with beep once it
accepts enrollment.
VHB tape
Arming LED will flash
green and red.
An unenrolled HeliPAD
screen will appear as
such.
