Ceiling
Floor
RE110P - RE610P PIR Motion Sensor
CryptiX PIR Motion Sensor
alarms when motion is sensed
or when the external contact is opened. It is battery
powered and requires no installation tools. A Pyroflex
™
sensor with HighBar
™
signal processing allows for industry-
leading pet immunity and catch performance.
Features
• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty
Enroll
by placing the panel into wireless enrollment mode
and then sending an enrollment signal from the motion
sensor. Alternatively, the motion sensor can be enrolled by
scanning its bar code using the HeliLink app or by entering
its 8-character serial number on the interactive service
provider’s web portal.
Options for sending an Enrollment Signal
• Remove the battery tab, OR
• Remove the cover to trip tamper
Install
using the included 3M VHB
®
tape to adhere the motion
sensor on a wall or in a corner. The tape should be applied
to the
back
when wall mounting or to the
back bevels
when
corner mounting. Alternatively, screw mounting can be
done by punching out the screw mounting holes.
Installation Tips
•
Mount 7.5 to 9.5 feet from the floor for an
optimal balance between catch performance
and pet immunity.
• Remove the cover and circuit board before
trying to punch out the screw mounting holes.
• Ensure the bug foam stays intact and snug
around the IR sensing element when re-
installing the circuit board.
External Contact
(not evaluated by ETL)
• Use a
normally-closed
contact because the
motion sensor will transmit an alarm when it
sees the external contact
open
.
• Do not use end-of-line resistors.
CE installations must use a cover-securing screw.
Mounting Screw Holes
Cover-Securing Screw Hole
Use the Helix installation guide to verify proper system setup.
IN
STALL
G
U I D E
I
