RE619
Flood/Temp Range, CryptiX
™
-Compatible
Home Disaster™ Sensor
Features
•
Tri-Mode Environmental Sensing:
o
Flood/Moisture Sensor
o
Freeze – for Furnace Failure
o
Overheat – for Furnace runaway or Air Conditioning failure.
•
Cover tamper.
•
Strong, reliable RF signal.
•
8-10 year battery life on CR123A battery.
•
Low Battery indication.
•
8.3x3.5x2.7cm
Key Instructions
•
Battery “+” faces towards spring.
•
Flood
Alarm: when liquid rises 0.040 inches above sensor bottom.
Tamper: when cover is opened.
Supervisory: every hour.
•
Freeze
Alarm: when room temperature drops below 40F.
Tamper: when cover is opened.
Supervisory: every hour.
•
Overheat
Alarm: when room temperature rises above 100F.
Tamper: when cover is opened.
Supervisory: every hour.
Enrollment
•
Place panel in enrollment mode.
•
Tamper the device.
•
By default the Flood will enroll first – to add just the Freeze or just the
overheat, or use all three, go to resolutionproducts.com/helixsetup
Specifications
Flood sensing:
Freeze Alarm:
Overheat Alarm Temp:
Mounting hardware:
Titanium contacts
100K-Ohm nominal (DO NOT use an EOL resistor)
Transmitter handles 1 or 2 flood elements, no more.
0.04 inch floor spacing to eliminate floor
condensation falses.
Checks for moisture every 5 seconds: needs two
positive moisture checks to send Flood alarm.
(test mode: every second when cover is off)
7.2°C +/- 16.6°C
Restores when temp increases 4F from alarm
37.7°C +/- 16.6°C
Restores when temp decreases 4F from alarm
#6 or #8 screws
Dual Mode mounting:
Screwed to floor
Screwed to wall
Terminal wire capacity:
16 Gauge
Replacement Battery:
CR123A 1550 mAH
Temperature Range:
Housing dimensions:
-17°C to 48°C
8.3x3.5x2.7cm
Specifications subject to change without notice.
Internal & Close-up Pictures
Temp Element
Strain relief for
floor mounting
CONNECT
O
2
