RE926S_WiFi Communicator
Page 1 of 6
16-Jan-15
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
RE926S-03-00 WiFi Communicator with Z-wave
Features
•
Connects panels to local WiFi Network
•
Compatible with:
o
GE Simon XT
o
GE Simon XTi
•
Enables:
o
Alarm Reporting
o
Interactive Control Functions
o
Ethernet data reliability
o
Z-Wave Communicator included
Key Instructions
•
The same unit works for GE Simon XT & GE Simon XTi.
•
RE926S mounts inside the GE Simon XT panel and communicates with the
GE Simon XT and GE Simon XTi via the Expansion Connector.
•
Contains RF Module label – must be affixed to exterior of panel enclosure.
Operation
Event Reporting:
Events are reported to both the CMS monitoring receiver and the
SiteControl interactive server. All events use Contact ID reporting codes.
The following events are reported by default:
Alarms
Alarm cancels
Openings
Closings
System Low Battery
System Low Battery Restoral
AC Power Fail
AC Power Restoral
Interactive Control:
The system may be controlled remotely through the SiteControl interactive
platform.
Z-Wave
Z-Wave devices can be controlled via the Interactive function.
Siren
(RE116-C)
Can be used with a Simon XT
Future: Simon XTi
Revert to Factory Default Button
Press and hold for 5 seconds: Resets the board and keeps all settings
Press and hold for 10 seconds: Reverts board back to the factory default settings
RE926S_WiFi Communicator
Page 2 of 6
16-Jan-15
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Picture
LEDs
Ethernet LEDs
Indication
Power
(Green)
ON and Flashing once per second when the board is powered and
running
WiFi
(Red)
ON when the unit is registered with the local WiFi router
CS
(Red)
ON when the connection to the CMS central station is established
Platform
(Amber)
ON when the connection to the Panel, and connection to the
SiteControl interactive server is established
Z-Wave
Module
WPS
Button
Revert to
Factory
Default Button
Wi-Fi
Card
Status LEDs
Z-Wave
Antenna
