Resol FlowCon Sensor HE, Установка, Эксплуатация, Пусконаладка, Обслуживание, Страница: 19 / 36

© RESOL 10263 flo
wcon_sensor
.monen.ind
d
F lo w C o n S e n s o r / S e n s o r H E
19 |
13. Operation and function
Adjustment values
In the adjustment values menu, different function and va-
lues can be selected and adjusted.
Î Press button 3 for two seconds to access the main
menu
Î
Access the adjustment values menu by selecting
“ Adjustment values”
Î Select the desired function or value by pressing buttons
1 and 2, then confirm by pressing button 3
Adjusting a value:
Î Select the value by pressing buttons 1 or 2
Î Briefly press button 3; the adjustment range is displayed
as a slide bar
Î Adjust the desired value by pressing buttons 1 and 2;
the value is displayed both in numbers as well as by the
button on the slide bar
Î Briefly press button 3 to confirm the adjustment
Î Press button 3 again in order to store the adjustment
and to get back to the adjustment menu
If button 3 is not pressed after an adjustment has been
made, the display switches back to the menu after a few se-
conds. The adjusted value will not be stored in that case.
Selecting a function or option:
Î Select a function or option by pressing buttons 1 or 2
Î Briefly press button 3
Î Select “Yes” to activate, resp. “No” to deactivate the
function
Î Briefly press button 3 to confirm the adjustment
Î Press button 3 again in order to store the adjustment
and to get back to the adjustment menu
An activated function is indicated by means of a marked
checkbox. The corresponding adjustment values are also
displayed.
Readiness
Tstsec 90 °C
Collector minimal.
Adjustment values
x
90
0
60 °C
Tstmax
Î In order to re-enter the info area, select “info area ...”
or press button 3 for two seconds
If no button is pressed within one minute, the display auto-
matically switches back to the info area.
In order to access all adjustment values, it may be ne-
cessary to enter the expert user code. Upon delivery,
the expert area of the adjustment values menu is already
activated. It can be locked again by entering a wrong code,
e. g. to avoid unqualified manipulation.
Further information about the expert user code and the
entering process can be found in the section “Expert user
code” of chapter 15.3.
Deutsch
English
Francais
Language