© RESOL 10263 flo
wcon_sensor
.monen.ind
d
F lo w C o n S e n s o r / S e n s o r H E
|
16
1.8 bar
Pressure
500 l/h
Flow rate
18.4 kW
Power
System OK
P
V
Display
Description
Adjustment range
Factory setting
Info area
Status display
Pressure
Current system pressure at the return sensor
Power
Current power of the system
Flow rate
Current flow rate at the flow sensor
System ok
Everything alright – no error
In the case of an error or warning, the display illumination flashes!
For more informationen about possible errors see chap. 16 on pg. 31 of this manual.
Other possible messages (instead of “System ok”):
T-Fl defect
Digital flow sensor defective
T-Re defect
Digital return sensor defective
Manual mode
Manual mode (Relay mode on “Min.”, “Max.” or “Off”)
D
T too high
D
T has been larger than 50 K for 20 minutes
Overpressure
Excess pressure warning
Leakage
Low pressure warning
Flow rate?
Flow rate warning, no flow rate has been detected
Fl pipe circ.
Flow pipe circulation – significant temperature increase during three or more consecutive nights
Re pipe circ.
Return pipe circulation – significant temperature increase during three or more consecutive nights
System display
For detailed information about the system display see chap. 14 on pg. 20 of this manual
Temp. / Defect
Indication of the temperature, resp. of a defect at the corresponding sensor
Loading, ...
Indication of the operational status above the store symbol, where applicable with a count-
down of the remaining phase runtime, see chap. 14
Balance value diagrams
Flow temp. today
Flow temperature curve of the current day
Ret temp. today
Return temperature curve of the current day
Flow temp. yest.
Flow temperature curve of the previous day
Ret temp. yest.
Return temperature curve of the previous day
Gains in kWh
Bar chart showing the heat gains of the last seven days
Balance value displays
Max. pressure
Maximum system pressure
Min. pressure
Minimum system pressure
Max. flow temp.
Maximum flow temperature
Max. return temp.
Maximum return temperature
Max. power
Maximum power
Heat qty.
Heat quantity cumulated since commissioning or last reset
Operating hours R1
Operating hours relay 1
12. Menu structure
The controller is operated and controlled via the menu.
During normal operation, the status is displayed.
Note:
The displayed values and options depend on
the functions and only appear if these are available
for the adjusted system parameters.