Resol FlowCon Sensor HE Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 36

Resol FlowCon Sensor HE Скачать руководство пользователя страница 12

© RESOL 10263 flo

wcon_sensor

.monen.ind

d

F lo w C o n S e n s o r / S e n s o r H E

|

12

11.2 Commissioning assistant

The next adjustment channel of the commissioning assi-
stant appears in the next menu line.

Î

To enter the adjustment mask, press button 3

In the following, the corresponding selection and adjustment
masks are shown.

Select country ...

Country United Kingdom

Date

01.01.2010

Commissioning assistant:

The list of countries is sorted alphabetically by the interna-
tional country codes (according to ISO 3166).

Î

Select the desired country by pressing buttons 1 and 2

Î

Briefly press button 3 to confirm the selection

Î

To store the adjustment and get back to the commissi-
oning assistant , press button 3 again

After a country has been selected and confirmed, a menu line
showing the selection appears below “Select country..”
If the desired country is not listed in the selection,
select a random country on the same hemisphere
and enter the exact coordinates in the submenu
“Country parameters” (see pg. 29) when the com-
missioning assistant has been completed.

Ukraine (UA)

United Kingdom (UK)

Vatican City (VA)

Select country ...

The

D e lt a S o l

®

Sensor / Sensor HE is equipped with a

commissioning assistant, which automatically and intuitively
leads through the adjustment of the necessary system pa-
rameters  upon  first  commissioning.  Only  if  the  commis-
sioning assistant has been successfully completed will the
controller commence normal operation and the menu will
become accessible.
The  commissioning  assistant  queries  the  necessary  para-
meters one after another.
As soon as a value has been entered and confirmed,
resp.  the  default  factory  setting  is  confirmed,  the
next parameter appears in the menu line below and
can be selected.
Exiting the commissioning assistant is only possible if
all necessary parameters have been adjusted.
Thus it is ensured that no value can be left out.

Language

English

Commissioning assistant:

Deutsch
English
Francais

Language

Now the next adjustment channel appears – the country
of the system location can be selected.

Î

To enter the selection mask for the country, press
button 3

Language English

Select country ...

Commissioning assistant:

Selecting the country of the system location

The display shows the selection mask.

Î

Select the desired language by pressing buttons 1 and 2

Î

Briefly press button 3 to confirm the selection

Î

To store the adjustment and get back to the
commissioning assistant, press button 3 again

Selection of the menu language

The commissioning assistant starts with the selection of
the menu language.

Î

To enter the selection mask in order to select a language
or confirm the factory setting, press button 3

Note:
If the system is located in a large country, enter
the exact coordinates (see pg. 29) in order to
achieve maximum system efficiency.

«
...
10
11
12
13
14
...
»

Содержание FlowCon Sensor HE





































Отзывы:

Нет отзывов