ResMed Elisee 350 Скачать руководство пользователя страница 42

Страница: 42 / 110

NOT013281-8

External DC power supply

CAUTION

Never turn the ventilator on with the power pack compartment empty. Always use the
dummy pack if no power pack is inserted.

Mains power pack located outside of the ventilator

External power supply from a vehicle

External battery pack

This is fitted and removed in the same way as the mains power pack. We recommend you
remove the external battery pack when the ventilator is switched off.

Note:

An external battery pack charger is available for Li-Ion type batteries.

1. Connect the external power cord to the socket on the

ventilator.

2. Plug the other end into the connector on the mains

power pack.

3. Plug the pack into a mains power outlet and switch on

(if necessary).

External power cord

1. Connect the 12–28 V DC power cord to the connector

on the ventilator.

2. Plug the power cord with the ResMed cigarette lighter

adapter attached into the cigarette lighter.

External
battery
pack

Mains
power
pack

1. Place the external battery pack (blue label) in the

compartment. If it has a sufficient charge, the
ventilator will start using it.

If the external battery needs charging, use the mains
power pack and power cord:

1. Connect the power cord to the external DC power

socket on the ventilator.

2. Connect the other end of the cord to the mains power

pack.

3. Plug the pack into a mains power outlet and switch on

(if necessary).

Содержание Elisee 350















































































































Результаты поиска

Содержание Elisee 350

Отзывы:

Похожие инструкции для Elisee 350

Бренды по названию

Популярные бренды

ResMed Elisee 350, Клиническое руководство

Результаты поиска

Содержание Elisee 350

Отзывы:

Похожие инструкции для Elisee 350

Бренды по названию

Популярные бренды