PROSiXSIREN
Wireless Siren/Strobe
Installation and Setup Guide
This wireless siren/strobe is intended for use with Honeywell Home controls that support PROSiX™ series devices.
PROSiXSIREN
OPEN
Gently twist the top of the Siren counterclockwise and the mounting bracket clockwise to separate them.
MOUNTING
The PROSiXSIREN can be mounted on the wall or on the ceiling.
The rear tamper breakout [
A
] MUST be mounted to a stud, solid wood, or with a robust wall anchor.
After enrolling, verify adequate signal strength by conducting sensor test (see controller’s instructions) with the
device in its intended mounting location. Adjust the device location and orientation as necessary.