KrosFlo® TFF System
–
Auxiliary Scale ACSS-20K
User Guide
27 repligen.com 420-14871-001 Rev. 00
Table 16. Peak Hold
–
Local settings
Submenu
Setting
3.5.1.Acc
Working mode accessibility
3.5.2.Lo
Lo threshold
16.2
Peak Hold operation
1.
Enter
<3.5.toP / 3.5.2.Lo>
submenu, set
<Lo>
parameter value (Lo threshold) after
exceeding of which maximum force is to be registered.
2.
Enter
<toP>
working mode (Peak Hold). From now on the scale registers and holds every
single weighing which is above the
Lo threshold
, and which is higher than the result of the
previous Peak Hold. Snapped Peak Hold value is signaled by
<Max>
pictogram at the top of
the screen.
3.
The start of the next process of Peak Hold measurement is possible only after removing the
load form the weighing pan and pressing
key.
4.
This causes returning to the home screen of
<toP>
mode. Pictogram
<Max>
is automatically
deleted.
17.
Totalizing
Totalizing is a working mode enabling to sum mass of all weighed ingredients, and to print (via scale-
connected printer) the total mass value. The pictogram allows to sum up to 30 weighing
(ingredients) maximum within one process.
17.1
Local settings
To go to local settings, enter
<3.6.Add>
submenu.
Table 17. Totalizing
–
Local settings
Submenu
Setting
3.6.1.Acc
Working mode accessibility
3.6.2.Snn
Save mode
3.6.3.Int
Time interval
3.6.4.Lo
Lo threshold
17.2
Totalizing operation
1.
Enter
<Add>
working mode (Totalizing), blinking “
▲
”
pictogram is displayed.
2.
If the ingredients are to be weighed in a container, first put the container on a weighing pan
and tare it.
3.
Load the weighing pan with the ingredient no. 1. When the indications are stable (
pictogram is displayed), press
key to confirm the mass.
4.
Unload the weighing pan,
ZERO
is displayed, “
▲
”
marker starts blinking again.
5.
Load the weighing pan with the ingredient no.2, wait for a stable weighing result and press
key.
6.
Total mass value of ingredient no. 1 and 2 is displayed, now the “
▲
”
pictogram is displayed
continuously.
