WEP 64 and 128-bit:
The WEP-key consists of hexadecimal numbers (0-9 and A-F), and the length of the key is
depending on the chosen key-size. If a 64-bit key size is chosen 10 hexadecimal values should
be entered. If 128-bit key size is given 26 hexadecimal values should be given. Also choose if the
authentication type should be open system or shared key. If shared key is used the base station
challenges the CPE for the correct WEP-key. Check your ISP information for the correct setting.
WPA1 and 2:
The modem supports both WPA1 and WPA2 with PSK (Pre Shared Key) and encryption
algorithms TKIP and AES/CCMP. Choose the correct WPA and encryption method according to
your information from the ISP. Enter the correct pass phrase, which should be between 8 and 63
characters long. (Only use alphanumerical characters and avoid country specific characters like å,
ä and ö). In some cases – your ISP will supply a key of 64 hexadecimal characters.
To store and apply the settings, press Save Settings.
Repeatit AB | Hamngatan, 33 | 172 66 Sundbyberg | Sweden
Tel: +46 8 570 106 66 | Fax: +46 8 570 106 67
E-mail: [email protected] | www.repeatit.se
