Reolink Wireless Camera
User Manual
65
Warm Tips
The Wi-Fi signal strength of wireless cameras can be interfered with by numerous
factors, such as other Wi-Fi networks around, the distance from the router/hot spot,
walls/obstacles in between, transmitting power of the router/extender, etc.
Make sure that the wireless signal is three bars or at least two bars. One bar signal
is too weak to establish a stable connection.
If the Wi-Fi signal strength is low/weak, you may refer to the following guides to
improve the Wi-Fi signal strength of the wireless camera.
·Shorten the distance between your wireless camera and the router.
·Change the wireless channel on your router to avoid interference from Wi-Fi
networks around.
·Keep the wireless camera away from appliances or electronic devices like a
microwave, computer, wireless router, etc.
·Install the wireless camera to somewhere with fewer walls and obstacles in
between with the router.
·Fasten the antennas on the wireless camera.
·Change a router which has higher wireless transmitting power.
·Install a Wi-Fi extender.
FTP Settings
For cameras that support FTP, you can set up FTP settings for the camera to
upload pictures or videos to the FTP server.
Step 1
. Go to camera settings, on
Advanced
>
FTP Upload
page, enable
FTP
Upload
option.