Rentech SILVERBRIC Series, Руководство пользователя

Страница: 20 / 40

All Right Reserved © SHENZHEN BAK POWER BATTERY CO., LTD
18
Integrated Lithium-ion Battery Pack
User Manual
3 INSTALLATION GUIDE
 Do not install in a working environment with metal conduction type dust.
 Do not install in an area containing corrosive gases.

Do not install in high dust concentrated areas.
 Do not place any items on the top of lithium-ion battery pack. People must not sit on the
battery.
Power check
Before installation, please confirm that the load capability of inlet wire meets the
requirements of the new equipment. Check to see if the power supply corresponds to
the equipment nameplate of the voltage and frequency and if the current capacity
has decreased due to the aging of the wire.
If in doubt, please check with your local power supply Consultation Department.

Ground wire
Earthing terminal is available; zero voltage with reference to main earth cannot
exceed 5V.

DC output voltage and load capacity
Lithium-ion battery pack of nominal DC output 48V:
50Ah/50A DC, 100Ah/100A DC, 150Ah/150A DC.
And nominal DC output 24V: 100Ah/100A DC, 200Ah/200A DC.

When installing the lithium-ion battery pack, the user should check the lithium-
ion battery pack in advance to make sure that the contacts and connectors are safely in
place to avoid an open circuit or short circuit fault.

During installation, do not connect the lithium batteries polarity in reverse or in any
way incorrectly, to avoid causing a short circuit.

Please do not connect the terminals with no security or insulation protection, so as to
avoid the risk of electric shock.
3.2
Installation preparation
3.2.1
Unpacking and inspection
BTESF series lithium batteries and accessories use packaging of cardboard boxes
or wooden boxes. When unpacking, be careful when dismantling. Inspect the
device and accessories according to the package list, to ensure it’s complete and
make certain nothing was damaged during shipping.
Before clearing the packaging, make sure that all parts are included. If equipment
or accessories are damaged in transit, or incomplete or incompatible, the equipment,