Renson Endura Delta 330 Скачать руководство пользователя страница 39

Страница: 39 / 140

Endura

Delta

Installer

Plug the router in and turn it on. Check that the Endura Delta is also connected to the mains

supply and is turned on. You can now continue with the configuration.

• Connect the other end to

an available LAN port on

your modem. NOT THE

INTERNET WAN PORT.

• Connect the Ethernet cable to the port on the Endura Delta.

➁

➀

8.1.1.2

•

Installing the app

The Endura Delta app is available for the major mobile platforms (iOS,

Android, Windows) allowing you to have immediate access to your

personalised Renson controls using any modern smartphone/tablet.

You can download the Endura Delta app from the app store for your operating system.

− Android: Play Store (starting with Android 4)

− iOS: App Store (starting with iOS 7)

− Windows: Windows Store (starting with Windows Mobile 8)

8.1.1.1

•

Connecting the Endura

Delta to a Wi-Fi network

Connect the router to the Endura Delta using a category 5 Ethernet cable (RJ45). If there is no

Wi-Fi connection available in the home, the installer must use his/her own router, which can then

be removed after configuring the Endura Delta.

Содержание Endura Delta 330













































































































































Результаты поиска

Содержание Endura Delta 330

Отзывы:

Бренды по названию

Популярные бренды

Renson Endura Delta 330, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Endura Delta 330

Отзывы:

Бренды по названию

Популярные бренды