Operating instructions
Displayport Splitter
Item no. 1383254
Intended use
The product is intended to connect one DisplayPort output device with two DisplayPort
input devices. The product supports a resolution of 1920×1080 for two input devices
and a resolution of 3840×1600 (4K*2K) for one input device. Power is supplied by a USB
power adapter or other devices connected via the USB cable (supplied).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
•
Displayport Splitter
• USB 2.0 cable (type A to Micro B)
•
Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
•
The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
•
Do not place the product under any mechanical stress.
•
Place the cables in such a way that no unintentional pulling or tripping
over it is possible.
•
Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
-
is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
•
The complete product must not become wet or damp. Never touch the
product with wet hands.
•
Also observe the safety and operating instructions of any other devices
which are connected to the product.
•
Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
•
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
• Switch off the devices to be connected.
• Connect the DisplayPort plug of the adapter to the DisplayPort socket of the output
device.
• Use two DisplayPort cables (e.g. DisplayPort to HDMI) to connect the DisplayPort
sockets of the adapter to two input devices.
•
To supply power to the adapter, use the supplied USB cable to connect the micro
USB socket of the adapter to a USB power adapter or a device with a USB port that
supplies 5 V/DC.
3
1 Displayport plug
2 Displayport socket
3 Micro USB port
2
1
•
If the USB cable is connected to a USB power adapter, plug the USB power adapter
to a household power outlet. If the USB cable is connected to a device for power,
switch on that device.
•
Switch on all the devices connected. The adapter functions.
•
You can have the desired display performance only if the connected
output and input devices are capable.
•
The adapter is independent of the operating system of any computer
connected, making the use of software or drivers unnecessary.
Maintenance and cleaning
• Before cleaning the product, switch off all connected devices and unplug any
connected cables.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
•
Do not immerse the adapter into liquids.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing as this may cause scratch marks.
•
Use a longhaired, soft and clean brush and a vacuum cleaner to easily remove dust.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection
of the environment.
Technical data
Operating voltage................................5 V/DC via USB
Compliant with .....................................VESA DisplayPort standard version 1.2
Supported video resolution ...............1920 × 1080p @ 60 Hz (2 output devices)
3840 × 1600p @ 30 Hz (one output device)
Connector pins ....................................
Nickel-plated
Conductor type ....................................OFC
USB cable length ................................90 cm
Operating conditions ..........................
-30 to +70 ºC, 0 – 90 % RH
Storage conditions..............................
-10 to +70 ºC, 0 – 90 % RH
Dimensions (W × H × D) .....................63 × 50 × 15.5 mm (adapter)
Weight ...................................................38 g (adapter alone)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V2_1215_02-ETS-Mkd