TONiC diagnostic kit
User guide
13
5. Hardware driver installation
5.1. Automatic driver installation
The hardware drivers will automatically be installed when the software is started for the first time.
DO NOT CONNECT THE SYSTEM TO THE USB PORT BEFORE STARTING THE SOFTWARE FOR THE FIRST TIME
AS THE DRIVERS MAY NOT INSTALL CORRECTLY.
NOTE:
Hardware drivers need to be installed for each USB port being used for connection to the software.
Click on the ‘
TONiC diagnostic
’ icon on the desktop.
The Device Driver Installation Wizard will start automatically.
Follow the instructions on the screen and the drivers will automatically be installed for that USB port.
NOTE:
On Windows 8 it will ask:
‘Do you want to allow the following program from an unknown publisher to make changes to this computer ?’.
Click
Yes
to continue the driver installation.
Click
Finish
and the software is ready to use.
5.2. Manual hardware driver installation
If the drivers have not automatically installed they can be manually installed.
Browse C: Program files (x86)/Renishaw/TONiC diagnostic.
Depending upon if it is a 32 bit or 64 bit PC select Drivers (x32) or Drivers (x64).
Click on DPInst and the Device Driver Installation Wizard will open.
Follow the instructions on the screen and the drivers will automatically be installed for that USB port.
NOTE:
On Windows 8 it will ask:
‘Do you want to allow the following program from an unknown publisher to make changes to this computer ?’.
Click
Yes
to continue the driver installation.
Click
Finish
and the software is ready to use.
6. Repairing/uninstalling the software
Ensure there are no copies of Renishaw’s TONiC software running before attempting to uninstall.
Go to
Control panel >>Programs and Feature
s.
Select
TONiC diagnostic
.
Select
uninstall, change
or
repair
as required.
The InstallShield Wizard software will start automatically.
Follow the instructions on the screen to remove or repair the software as required.
TONiC
User guide