Renfert Vibrax, Часто задаваемые вопросы

Страница: 4 / 17

- 1 - EN
FAQ - English
For chapter indications, refer to the complete instruction manual on
the internet.
Error Possible cause Corrective action
The device gen-
erates no vibra-
tions.
• Power cord not prop-
erly plugged in at the
device.
• Blown fuse.
• No power at the wall
outlet.
• Check that the power cord is se-
curely seated in the socket.
• Replace the fuse (refer to
Sec. 3.4).
• Test the wall outlet for power.
No difference
in the vibration
intensity be-
tween the switch
settings Fine /
Coarse.
• Faulty diode (short
circuit).
• Return the device for service.
No function in
coarse oscillation
mode.
• Faulty diode (interrup-
tion).
• Faulty switch.
• Faulty switch connec-
tion wiring.
• Return the device for service.
No function in
fine oscillation
mode.
• Faulty switch.
• Faulty switch connec-
tion wiring.
• Return the device for service.
No effect at the
different power
level settings.
• Faulty switch.
• Faulty switch connec-
tion wiring.
• Return the device for service.
Device extremely
loud during oper-
ation.
• Loose internal compo-
nents.
• Loose rubber mat.
• Return the device for service.
• Attach the rubber mat correctly
(see Chap. 1.2).