Renfert Millo, Инструкция по эксплуатации

Страница: 19 / 148

- 5 - EN
5. Package contents
1 Millo / Millo pro dental arch trimmer
1 Cutter, tapered 6-blades (coarse),
NOT suitable for plastic models.
1 Allen key
1 Operating instructions
1 Grounded wall plug
(No. 1805-0000 only)
6. Models
1804-0000 Millo , 230 V, 50 / 60 Hz
1804-1000 Millo , 120 V, 60 Hz
1805-0000 Millo pro , 230 V, 50 / 60 Hz
1805-1000 Millo pro , 120 V, 60 Hz
7. Accessories
No. 1806-0001 Cutter, conical cross-cut
(fine)
No. 1806-0002 Cutter, tapered 6-blades
(coarse), NOT suitable for
plastic models.
No. 2921-0050 Silent TS , 230 V, 50 / 60 Hz
No. 2921-1050
Silent TS
, 100 - 120 V,
50 / 60 Hz
No. 90003-4305 Universal hose connector
adapter
No. 2926-0000 Y-junction
No. 15-0823
PVC Flex super elastic
suction hose (sold by the
metre)
8. Troubleshooting
Problem Cause Remedy
Unit does not
operate after
switching it on.
• Mains cable not
plugged in.
• No electricity supply to
the mains socket.
• Unit connected to
an extractor that is
switched off.
• Plug in the mains cable.
• Check the mains socket.
• Check the extractor, refer to the extrac-
tor instructions if necessary.
Unit switches
off during
operation.
• Motor fuse triggered,
as the motor tempera-
ture is too high.
• Fuse triggered.
• Unplug the unit and allow it to cool for
approx. 1.5 hrs.
• Use an extractor (see Section 1.3).
• Switch on the safety cut-out / replace
fuse (see Section 3.3).
• If the fuse triggers again, return the
unit for repair.
Heavy dust
accumulation
on the work
table.
• Extractor not used.
• Extraction power too
low.
• Use an extractor (see sect. 1.3).
•
Check the filter of the extractor.
• Check that the suction hose is not
bent.
• Check that the suction hose is fitted
securely to the connector
(D, Figure 2, 4).
• Use a higher extraction setting.