© 2008 RenewAire LLC
Due to continuing product development, specifications are subject to change without notice.
For Technical Updates and other current info, visit
www.breeze.renewaire.com
BR70_130_Manual_FEB08.doc.
140036_003
Revised 2/08
1
4510 Helgesen Drive, Madison, WI, 53718
608.221.4499, 800.627.4499, Fax: 608.221.2824
[email protected] www.renewaire.com
INSTALLATION AND OPERATION MANUAL
Model BR70/BR130
Units should be installed by properly licensed contractor(s) according to local
code requirements.
BR Unit (door closed)
BR Unit (door open)
TW Kit
R
ISK OF
F
IRE
,
E
LECTRIC
S
HOCK
,
OR
I
NJURY
.
O
BSERVE ALL
CODES AND THE FOLLOWING
:
1.
Use the unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
2.
Unplug the unit before servicing or cleaning.
CAUTION:
more than one disconnect switch may be
required to de-energize the equipment for servicing.
3.
Do not use in cooking area.
4.
Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel
burning equipment that might be installed in the area
affected by this equipment. If this unit is exhausting air
from a space in which chimney-vented fuel burning
equipment is located, take steps to assure that combustion
air supply is not affected. Follow the heating equipment
manufacturer's guidelines and safety standards such as
those published by the National Fire Protection
Association (NFPA), the American Society for Heating,
Refrigeration and Air Conditioning Engineers
(ASHRAE), and local code authorities.
5.
Do not connect this unit to fume hoods or collection
systems for toxics.
6.
Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction
codes and standards.
7.
When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
8.
This unit must be properly vented to the outside.
9.
This unit must be connected to a properly grounded
power outlet.
1.
This unit is intended for general ventilating use only. Do
not use to exhaust hazardous or explosive materials and
vapors.
2.
To avoid motor bearing damage and noisy and/or
unbalanced impellers, keep drywall spray, construction
dust, etc., off power unit.
3.
This installation manual shows the suggested installation
method. Any structural alterations necessary for
installation must comply with all applicable building,
health, and safety code requirements.
WARNING
BR130 (Door Closed)
BR130 (Door Open)
CAUTION
