Renesas RZ/A1H Series, Руководство пользователя

Страница: 9 / 34

RSK+RZA1H 3. Tutorial Project Workspace
R20UT2845EG0200
Rev.
2.00
Page 9 of 34
3. Tutorial Project Workspace
3.1 Introduction
DS-5 is an integrated development tool that allows the user to write, compile, program and debug a software
project on the RZ family of Renesas microcontrollers. DS-5 will have been installed during the installation of
the software support for the Renesas Starter Kit product. This manual will describe the stages required to
create and debug the supplied tutorial code.
3.2 Jumper and Switch Configuration
Ensure jumpers and switches are in the following positions:
Jumper Pins Switch Position Switch Position
JP11 2 - 3 SW4-1 OFF SW6-1 OFF
JP12 1 - 2 SW4-2 OFF SW6-2 ON
JP18 1 - 2 SW4-3 OFF SW6-3 OFF
JP21 1 - 2 SW4-4 OFF SW6-4 ON
PWR_SEL 2 - 3 SW4-5 OFF SW6-5 ON
-- -- SW4-6 OFF SW6-6 ON
-- -- SW4-7 OFF -- --
-- -- SW4-8 OFF -- --
3.3 Starting DS-5 and Importing Sample Code

Start Eclipse for DS-5 by selecting it from the
Start Menu -> All Programs -> ARM DS-5 ->
Eclipse for DS-5. The first dialog box to
appear will be the Workspace Launcher.

Click ‘Browse’ and select a suitable location to
store your workspace, using the ‘Create New
Folder’ option as necessary. Click ‘OK’.
Note: The Workspace location does not have to contain your project files, the workspace contains the
configuration of the tool and can group projects together. Projects may be referred to from this location, or the
projects may be stored under this directory.
Mar 21, 2014