Renesas RX130 Series Скачать руководство пользователя

Страница: 72 / 88

RX Family

ADC Module Using Firmware Integration Technology

R01AN1666EJ0220 Rev. 2.20

Page 72 of 74

Dec 01, 2016

5. Demo Projects

Demo projects are complete stand-alone programs. They include function main() that utilizes the module and its

dependent modules (e.g. r_bsp). The standard naming convention for the demo project is <module>_demo_<board>

where <module> is the peripheral acronym (e.g. s12ad, cmt, sci) and the <board> is the standard RSK (e.g. rskrx113).

For example, s12ad FIT module demo project for RSKRX113 will be named as s12ad_demo_rskrx113. Similarly the

exported .zip file will be <module>_demo_<board>.zip. For the same example, the zipped export/import file will be

named as s12ad_demo_rskrx113.zip.

5.1

s12ad_int_demo_rskrx113

This demo uses periodic interrupts from MTU0 to trigger the ADC module to scan the potentiometer on the board. Each

time a scan completes, the program reads the converted value at interrupt level in a callback function and places it into a

global variable called “data”. This variable should be added to the Expressions window and made into a Real-time

Watch (double-click to make real-time). As the program runs, change the potentiometer position and observe the

corresponding changes in the variable.

5.2

s12ad_poll_demo_rskrx113

This demo scans the potentiometer on the board via a software trigger in an endless loop. Each time a scan completes,

the program reads the converted value at the application level and places it into a global variable called “data”. This

variable should be added to the Expressions window and made into a Real-time Watch (double-click to make real-time).

As the program runs, change the potentiometer position and observe the corresponding changes in the variable.

5.3

s12ad_poll_demo_rskrx130

This demo scans the potentiometer on the board via a software trigger in an endless loop. Each time a scan completes,

the program reads the converted value at the application level and places it into a global variable called “data”. This

variable should be added to the Expressions window and made into a Real-time Watch (double-click to make real-time).

As the program runs, change the potentiometer position and observe the corresponding changes in the variable.

5.4

s12ad_demo_rskrx64m

This is a simple demo of the RX64M A/D Converter (S12AD) for the RSKRX64M starter kit (FIT module

"r_s12ad_rx"). The demo uses the Multi-Function Timer Pulse Unit (MTU3a) to periodically trigger the ADC module

to perform conversion on channel 0 which is connected to the on-board potentiometer. Each time a scan completes, the

program reads the converted value at interrupt level in a callback function and places it into a global variable called

“g_data”. This variable should be added to the Expressions window and made into a Real-time Watch (double-click to

make real-time). As the program runs, change the potentiometer position and observe the corresponding changes in the

variable.

5.5

s12ad_demo_rskrx71m

This is a demo of the RX71M A/D Converter (S12AD) for the RSKRX71M starter kit (FIT module "r_s12ad_rx"). The

demo uses the Multi-Function Timer Pulse Unit 3 (MTU3a) to periodically trigger the ADC module to perform

conversion on channel 0 which is connected to the on-board potentiometer. Each time a scan completes, the program

reads the converted value at interrupt level in a callback function and places it into a global variable called “g_data”.

This variable should be added to the Expressions window and made into a Real-time Watch (double-click to make real-

time). As the program runs, change the potentiometer position and observe the corresponding changes in the variable.

5.6

s12ad_demo_rskrx231

This is a demo of the RX231 A/D Converter (S12ADE) for the RSKRX231 starter kit (FIT module “r_s12ad_rx”). The

demo uses the Multi-Function Timer Pulse Unit 2 (MTU2a) to periodically trigger the ADC module to perform a

conversion on channel 0, which is connected to the on-board potentiometer. Each time a scan completes, the program

reads the converted value at interrupt level in a callback function and places it into a global variable called "g_data".

This variable should be added to the Expressions window and made into a Real-time Watch. To do that, add it to the

Expressions window then right-click it. From the drop-down menu click on "Real-time Refresh". Right click again and

select "Real-time Refresh Interval" and set the refresh value to 200 ms. As the program runs, change the potentiometer

position and observe the corresponding changes in the variable.

Содержание RX130 Series

























































































Результаты поиска

Содержание RX130 Series

Отзывы:

Похожие инструкции для RX130 Series

Бренды по названию

Популярные бренды

Renesas RX130 Series, Примечание к применению

Результаты поиска

Содержание RX130 Series

Отзывы:

Похожие инструкции для RX130 Series

Бренды по названию

Популярные бренды