RX72T CPU Card
User’s Manual
R12UZ0031EJ0100 Rev.1.00
Page 7 of 29
Feb. 21, 2019
2. Specifications
2.1
Specification
Table 2-1 Overview of RX72T CPU Card Specifications
Item
Specification
Product name
RX72T CPU card
Board product No.
RTK0EMX990C00000BJ
Supported inverter board
/ product No.
Supplied with 24V Motor Control Evaluation System for RX23T
24V Inverter Board / RTK0EM0001B00012BJ
Exterior view
Note: Appearance of actual product may differ from photo.
MCU
Product group
RX72T group
Product No.
R5F572TKCDFB
CPU max.
operating frequency
200 MHz
Bit count
32 bits
Package / Pin count LFQFP / 144 pins
ROM
1MB
RAM
128KB
MCU input clock
10MHz
Input power supply voltage
DC 5 V (
±
5%) *
1
Selectable among the following:
•
Power supply from supported inverter board
•
Power supply from E1, E2 Lite
*
2
Supported sensors
Hall sensor, encoder
(through holes provided for signal monitoring test pins)
Supported emulator
E1, E2 Lite
Connectors
•
Inverter board connectors x 2
•
Extender board connector x 2 (Unmounted)
•
SCI communication connectors x 3 (Two of them are unmounted
)
•
CAN communication connector (Shared with SCI connector,
unmounted)
•
Emulator connector
•
Hall sensor signal input connector
•
Encoder signal input connector
Switch
MCU external reset switch
LEDs
User control LEDs x 2
Operating temperature
Room temperature
Operating humidity
No condensation
Note 1.
Supply voltage is DC 3.3V from E2 Lite.
Note 2.
Power supply from E1 or E2 Lite is not supported when INV-BRD is connected.
