Emulation Adapter
System Configuration and Setup
R20UT4460EJ0110 Rev. 1.10
Page 28 of 53
Nov. 01, 2019
3. System Configuration and Setup
The system configurations of this emulation adapter are as follows according to your intentions in using it.
•
A simple evaluation board (See section 3.1.)
•
An emulation board (See section 3.2.)
3.1
System Configuration as a Simple Evaluation Board
Figure 3-1 shows a system configuration when the emulation adapter is connected to the base board for use as a
simple evaluation board. Connection of an emulator is not essential.
Using the pin headers on the base board enables the control and monitoring of each pin of the target device.
Figure 3-1 System Configuration (Simple Evaluation Board)