R0E521000CPE00 User’s Manual
2. Setup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 45 of 92
2.9.8 Connecting to an 80-pin 0.5mm pitch LQFP Foot Pattern
Figure 2.27 shows a procedure of connecting to an 80-pin 0.5mm pitch LQFP foot pattern on the user system using the
R0E5212DACFK00 (included with the R0E5212DACPE00). For details on the R0E5212DACFK00, refer to its user's manual.
(1) Mount the NQPACK080SD-ND included with the R0E5212DACFK00 to the user system.
(2) Attach the YQPACK080SD included with the R0E5212BACFK00 to the NQPACK080SD-ND and secure it with the
YQ-GUIDE's.
(3) Attach the R0E5212DACFK00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E5212DACFK00 to the YQPACK080SD.
Figure 2.27 Connecting to an 80-pin 0.5mm pitch LQFP foot pattern
CAUTION
Note on Connecting to the User System:
z
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
IMPORTANT
Notes on Connectors of the Converter Board:
z
The connectors of the R0E521000CPE00 and R0E5212DACFK00 are guaranteed for only 50 insertion/removal
iterations.
z
The connectors of the R0E5212DACFK00 and YQPACK080SD are guaranteed for only 100 insertion/removal
iterations.
YQ-GUIDE(
×
4) *
YQPACK080SD *
NQPACK080SD-ND *
R0E521000CPE00
R0E5212DAC
Ｆ
K00
FLASH version
MCU
On-board evaluation
HQPACK080SD
(not included)
● No. 1 pin
*: These items are included with the R0E5212DACFK00
80-pin 0.5mm pitch LQFP
(PLQP0080KB-A) foot pattern
①
②
(3)
(4)
