Renesas QB-RL78D1A2, Руководство пользователя

Страница: 8 / 41

QB-RL78D1A2 In-Circuit Emulator CHAPTER 1 GENERAL
R20UT3110EJ0101 Rev.1.01 Page 8 of 41
Nov 28, 2014
1.1 Hardware Specifications
Table 1-1. QB-RL78D1A2 Hardware Specifications
Parameter Specification
Target device R5F10DSL,R5F10DSK,R5F10DSJ,R5F10DPL,R5F10DPK
Operating voltage 2.4V to 5.5V
Note7
Operating
frequency
Main
system
clock
Note1
High-speed
system clock
oscillator
2.7V
≤
VDD
≤
5.5V
：
1
～
20 MHz
2.4V
≤
VDD < 2.7 V
：
1
～
8 MHz
High-speed
on-chip oscillator
2.7V
≤
VDD
≤
5.5V
：
4
～
32MHz
2.4V
≤
VDD < 2.7 V
：
4
～
24 MHz
Low-speed on-chip oscillator 2.4 V
≤
VDD
≤
5.5V: 15 KHz
Subsystem clock oscillator
Note2
2.4 V
≤
VDD
≤
5.5V: 32.768 KHz
PLL 2.7 V
≤
VDD
≤
5.5V: 32MHz
2.4V
≤
VDD < 2.7 V
：
24 MHz
Operating temperature range 0 to 40°C (No condensation)
Storage temperature range
−15 to 60°C (No condensation)
External dimensions See figure below
Power
consumption
Target system power supply
Current: approx. 55 mA MAX
Weight Approx. 400 g
Host interface USB interface (1.1, 2.0)
Note1 Errors are within ±0.05%. However, this does not apply to errors of the oscillator or clock system
on the target board.
Note2 Errors are within ±0.004%. However, this does not apply to errors of the oscillator or clock
system on the target board.
Note3 Does not include projection of power switch
Note4 Includes projection of screw that fixes rear space adapter
Note5 Rear space adapter can adjust the height from 30 mm (longest) to 0 mm (shortest)
Note6 Front space adapter can adjust the height from 20 mm (longest) to 5 mm (shortest)
Note7 Use within voltage-range of the target device.
112mm
Note3
108mm
Note4
67mm
Rear space adapter
Note5
Front space adapter
Note6