P9415-R-EVK Evaluation Kit
R16UH0015EU0100 Rev.1.0
May 27, 2021
Page 3
1. Features
■
Receives up to 15W of power from Qi Extended Power Profile (EPP) Transmitter
■
Transmits up to 5W of power in WattShare™ (TRx) mode
■
WPC1.2.4 Extended Power Profile (15W) compatible
■
WPC 1.3 Specification hardware ready
■
Up to 87% system efficiency in Receiver mode
■
Uses thin profile receiver coil (0.3mm)
■
Score line to break the applications circuit for prototyping
■
Easy configuration of design parameters using P9415-R Windows GUI
■
Connector compatible with “WPD-USB-DONGLE” USB to I2C dongle
■
4-layer PCB with 1 oz. copper
■
Extensive support collateral: Schematics, Layout files, BOM
■
Supports Bi-Directional communications
■
X-Y alignment coils embedded in the PCB
■
Embedded 32-bit ARM® Cortex®-M0 processor
■
Supports I2C 400kHz standard interface and GPIOs
2. Evaluation Kit Contents
■
P9415-R Evaluation Board assembled with Coil
3. Overview
The P9415-R-EVK Wireless Power Evaluation Board serves to demonstrate the features and performance of the
9415-R 15W Wireless Power Receiver with WattShare™ mode. Renesas P9243-GB-EVK Evaluation Board or
any other Qi certified Extended Power Profile (EPP) transmitter can be used as the power transmitter for P9415-
R-EVK Evaluation Board testing.
The P9415-R-EVK demonstrates a high-efficiency, turnkey reference design supported by comprehensive
online, digital resources to significantly expedite design-in effort and enable rapid prototyping.
Using the P9415-R Windows GUI customers can quickly customize operating parameters for their custom
applications. Operating parameters such as foreign object detection (FOD) parameters can be configured by
either writing to internal SRAM registers via the I2C interface, or by loading a custom configuration generated by
the P9415-R Windows GUI into The P9415-R features Multiple-time programmable (MTP) non-volatile memory.
WPD-USB-DONGLE is required to connect P9415-R-EVK with the windows GUI and needs to be ordered
separately.
