M3028BT2-CPE User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J1457-0300 Rev.3.00 July 22, 2009
Page 56 of 90
3.6 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
H/W breakpoint Setting Window in initial
state
Select the “Enable H/W Break” check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
Setting Break Event
Click the event line at which you want set a break event.