M3028BT2-CPE User’s Manual
1. Outline
REJ10J1457-0300 Rev.3.00 July 22, 2009
Page 16 of 90
(5) Power supply for the user system
This is a power supply for the user system. As this emulator cannot supply the power to the user system, supply the power
to the user system separately from the emulator.
(6) Host
machine
This is a personal computer for controlling the emulator.
(7) Package converter board such as M30290T-80FPD
This is a package converter board for connecting to an MCU foot pattern on the user system. For details, refer to “2.8
Connecting the User System” (page 31).
1.2.2 Names and Functions of each part of the Emulator
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
MADE
POWER
SW1
COMPACT EMULATOR
IN
T
JP1
5.
0V
JP2
3.3
V
EX
T
CLOCK
RESET
RUN
LED3
LED6
L
E
D5
L
E
D4
POWER
LED1
SAFE
LED2
Target status LEDs
LED3: User system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET (RESET)
LED6: Program execution (RUN)
System status LEDs
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
JP1: MCU power supply source selection jumper
(factory-setting: INT)
JP2: MCU power supply voltage selection jumper
(factory-setting: 5.0V)
System reset switch
J2: USB interface connector
J1: Power connector
M3028BT2-CPE
POWER USB
5.0V
5.0V
3.3V
MC
U
PO
WER
EXT
INT
JP2
JP1
STATUS
SYSTEM
STATUS
TARGET
MADE IN JAPAN
COMPACT EMULATOR
POWER
SAFE
POWER
CLOCK
RESET
RUN
Figure 1.2 Names of the LEDs on the upper panel of the M3028BT2-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit’s operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
Name Number Color Status
Meaning
ON
Power is supplied to the emulator.
POWER LED1 Orange
OFF Power is not supplied to the emulator.
ON
Emulator system has started normally.
SAFE LED2
Green
OFF Emulator system has not started normally.
