M3028BT2-CPE User’s Manual
Terminology
REJ10J1457-0300 Rev.3.00 July 22, 2009
Page 13 of 90
Terminology
Some specific words used in this user’s manual are defined as follows:
Emulator M3028BT2-CPE
This means the compact emulator (this product) for M16C/Tiny Series MCUs.
Emulator system
This means an emulator system built around the M3028BT2-CPE emulator. The M3028BT2-CPE emulator system is
configured with an emulator main unit M3028BT2-CPE, power supply for the emulator, emulator debugger and host machine.
Renesas Integrated development environment High-performance Embedded Workshop
This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an
emulator debugger function allowing for the emulator to be controlled from the host machine via an interface. Furthermore, it
permits a range of operations from editing a project to building and debugging it to be performed within the same application.
What’s more, it supports version management.
Emulator debugger
This means a software tool which starts up in the integrated development environment High-performance Embedded
Workshop to control the compact emulator for the M16C R8C/Tiny Series.
Firmware
This means a program stored in the flash ROM of the emulator. It analyzes contents of communication with the emulator
debugger and controls the emulator M3028BT2-CPE. This program is downloadable from the emulator debugger to upgrade
the debugger, etc.
Host machine
This means a personal computer used to control the M3028BT2-CPE emulator system.
Target MCU
This means the microcomputer you are going to debug.
User system
This means a user’s application system using the microcomputer to be debugged.
User program
This means a user’s application program to be debugged.
Evaluation MCU
This means a microcomputer mounted on the emulator which is operated in the special mode for the emulator.
#
In this user’s manual, this symbol is used to show active LOW. (e.g. RESET
#
)
