Renesas Emulation Probe for M32C/87 Group M30870T-EPB Скачать руководство пользователя

Страница: 18 / 104

M30870T-EPB User’s Manual

1. Outline

REJ10J0482-0300 Rev.3.00 February 16, 2006

Table 1.6 M30870T-EPB specifications (2/2)

Host machine interface

- LPT parallel (ECP, EPP, Byte/compatibility and Nibble/compatibility modes)
- USB (USB 1.1, full-speed)
- LAN (10BASE-T)

Power supply to emulator

Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)

Connection to user system
(see "2.9 Connecting the User System"
on page 29)

For 144-pin 0.5-mm-pitch LQFP (144P6Q-A):

M3T-FLX-144NSD (not included)

For 100-pin 0.5-mm-pitch LQFP (100P6Q-A):

(1) M30800T-PTC (included) + M3T-100LCC-QSD (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)

+ M3T-FLX-100NSD (not included)

(3) M3T-F160-100NSD (not included)

For 100-pin 0.65-mm-pitch QFP (100P6S-A):

(1) M30800T-PTC (included) + M3T-100LCC-DMS (not included)

+ M3T-FLX-100NRB (not included)

(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)

+ M3T-DUMMY100S (not included)

(3) M30800T-PTC (included) + M3T-100LCC-DMS (not included)

+ M3T-DIRECT100S (not included)

For 100-pin LCC socket:

M30800T-PTC (included) + IC61-1004-051 (included)

1.5 Operating Environment

Be sure to use this emulator with the operating environmental of the emulator and host machine listed in Tables 1.7 and 1.8.

Table 1.7 Operating environmental conditions

Item Description

Operating temperature

5 to 35°C (no dew)

Storage temperature

-10 to 60°C (no dew)

Table 1.8 Operating environment of the host machine

Item Description

Host machine

IBM PC/AT compatibles

OS Windows

Windows 98
Windows XP
Windows 2000

CPU

Pentium III 600 MHz or more recommended

Memory

128 MB or more recommended

Pointing device such as mouse

Mouse or any other pointing device usable with the above OS
that can be connected to the main body of the host machine.

* Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States

and other countries.

Page 18 of 104

Содержание Emulation Probe for M32C/87 Group M30870T-EPB









































































































Результаты поиска

Содержание Emulation Probe for M32C/87 Group M30870T-EPB

Отзывы:

Похожие инструкции для Emulation Probe for M32C/87 Group M30870T-EPB

Бренды по названию

Популярные бренды

Renesas Emulation Probe for M32C/87 Group M30870T-EPB, Руководство пользователя

Результаты поиска

Содержание Emulation Probe for M32C/87 Group M30870T-EPB

Отзывы:

Похожие инструкции для Emulation Probe for M32C/87 Group M30870T-EPB

Бренды по названию

Популярные бренды