Rev.1.01 2007.02.16
RJJ10J1643-0101
57
RAPI_TB1_F256
Timer B1 counts with internal clock
φ
/256.
RAPI_TB1_F512
Timer B1 counts with internal clock
φ
/512.
RAPI_TB1_F2048
Timer B1 counts with internal clock
φ
/2048.
RAPI_TB1_F8192
Timer B1 counts with internal clock
φ
/8192.
RAPI_TV_F4
Timer V counts on falling edges of internal clock
φ
/4.
RAPI_TV_F8
Timer V counts on falling edges of internal clock
φ
/8.
RAPI_TV_F16
Timer V counts on falling edges of internal clock
φ
/16.
RAPI_TV_F32
Timer V counts on falling edges of internal clock
φ
/32.
RAPI_TV_F64
Timer V counts on falling edges of internal clock
φ
/64.
RAPI_TV_F128
Timer V counts on falling edges of internal clock
φ
/128.
RAPI_TIMER_ON
Sets the timer to start operating in __CreateTimer.
RAPI_TIMER_OFF
Sets the timer to stop operating in __CreateTimer.
RAPI_OVERFLOW
Enables overflow interrupt.
RAPI_OUT_F4 Outputs
φ
/4 clock.
RAPI_OUT_F8 Outputs
φ
/8 clock.
RAPI_OUT_F16 Outputs
φ
/16 clock.
RAPI_OUT_F32 Outputs
φ
/32 clock.
RAPI_OUT_8192 Outputs
φ
W/4 clock.
RAPI_OUT_4096 Outputs
φ
W/8 clock.
RAPI_OUT_2048 Outputs
φ
W/16 clock.
RAPI_OUT_1024 Outputs
φ
W/32 clock.
RAPI_AUTO_RELOAD
Uses auto reload facility.
• Specifiable definition values when timer A is used (RAPI_TIMER_A specified)
(Clock)
Specify one from { RAPI_TA_F8, RAPI_TA_F32, RAPI_TA_F128,
RAPI_TA_F256, RAPI_TA_F512, RAPI_TA_F2048, RAPI_TA_F4096,
RAPI_TA_F8192 }.
The default value is RAPI_TA_F8192.
(Interrupt)
If overflow interrupt requests are enabled, specify RAPI_OVERFLOW. If
no interrupts are specified, “No interrupt request” is set.
(Output)
Specify one from { RAPI_OUT_F4, RAPI_OUT_F8, RAPI_OUT_F16,
RAPI_OUT_F32, RAPI_OUT_8192, RAPI_OUT_4096,
RAPI_OUT_2048, RAPI_OUT_1024 }. If this specification is omitted,
“Clock output” is set.
• Specifiable definition values when timer B1 is used (RAPI_TIMER_B1 specified)
(Clock)
Specify one from { RAPI_TB1_F4, RAPI_TB1_F16, RAPI_TB1_F64,
RAPI_TB1_F256, RAPI_TB1_F512, RAPI_TB1_F2048,
RAPI_TB1_F8192 }. The default value is RAPI_TB1_F8192.
(Interrupt)
If overflow interrupt requests are enabled, specify RAPI_OVERFLOW. If
no interrupts are specified, “No interrupt request” is set.
(Reload)
To select the auto reload facility, specify RAPI_AUTO_RELOAD. If
RAPI_AUTO_RELOAD is not specified, “Select interval facility” is set.
• Specifiable definition values when timer V is used (RAPI_TIMER_V specified)
(Clock)
Specify one from { RAPI_TV_F4, RAPI_TV_F8, RAPI_TV_F16,
RAPI_TV_F32, RAPI_TV_F64, RAPI_TV_F128}. If this specification is
omitted, “Disable clock input” is set.
