Quick Start
Renesas Starter Kit
for RL78/L12
E1 Debugger
Application Headers
Application Headers
Serial
Port
LCD Module
Header
DC Power
Jack
Power LED
Reset
Switch
User
LEDs
E1
Header
User Switches
Analog Adjust
LCD Panel
Header
LCD Application board V2
LCD Panel
Interface (JA4)
Extra
Pins
Interface
NOTE: This Quick Start Guide covers installation of the e
2
studio DVD.
1.
Installation
Do not connect the E1 debugger module until the software support has been installed.
1.
Insert the DVD into your computer’s DVD-ROM drive. The DVD should automatically run the installation program. If
the installer does not start, browse to the DVD root folder and double click on ‘setup.exe’.
2.
Windows™ 7 / Vista users may see “User Account Control” dialog box. If applicable, enter the administrator
password and click ‘Yes’.
3.
The installer welcome screen will open. Follow the on-screen instructions to install the RSK software. This process
will take several minutes.
Note:
When prompted to specify a different location for installing any of the tools, do not change the default location.
During installation of the GNURL78 tools an activation code may be required. The installer will provide instructions to
register for a free activation code.
The Windows driver signing dialog box may be displayed. Please accept the driver to continue.
4.
After installation has completed successfully, click ‘Finish’.
