User’s
Manual
REJ10J1872-0200
R0E53033ACFG90
Rev.2.00
Apr 16, 2010
Converter Board for Connecting R8C/33A, /33C and /33D Groups 32-pin 0.8mm pitch LQFP
1. Outline
REJ10J1872-0200 Rev.2.00
Page 1 of 4
Apr 16, 2010
The R0E53033ACFG90 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00
for R8C Family
R8C/3x
Series to a foot pattern for 32-pin 0.8mm pitch LQFP
of R8C/33A, /33C and /33D Groups.
2. Package Components (See Figure 1)
Check to see if the R0E53033ACFG90 package has all the
following contents before using this product.
(1) R0E53033ACFG90 converter board ........................... 1 pc.
(2) YQPACK032SA
(made by Tokyo Eletech Corporation)
................ 1 pc.
(3) NQPACK032SA
(made by Tokyo Eletech Corporation)
.............. 1 pc.
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation)
.....................4 pcs.
(5) R0E53033ACFG90 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
PLQP0032GB-A
(32-pin 0.8mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53033ACFG90 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK032SA on the user system.
(1)
For debugging
Mount the NQPACK032SA on the foot pattern of the user
system and attach the YQPACK032SA on it. In addition,
connect the R0E53033ACFG90 to the YQPACK032SA,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53033ACFG90.
(2)
For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK032SA (not included) in order
on the NQPACK032SA on the user system.
Before using the R0E53033ACFG90, be sure to read the
precautions on page 3.
R0E53033ACFG90
YQ-GUIDE (×4)
YQPACK032SA
NQPACK032SA
Figure 1 Package components of the R0E53033ACFG90
Figure 2 Usage of the R0E53033ACFG90
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and
LSPACK are trademarks of Tokyo Eletech Corporation.
