Quick Start Guide: ASSP EASY Motor Control Kit
ASSP EASY Motor Control Kit
Quick Start Guide – rev. 1.0
1
Document Contents
1.
Introduction
1
2.
Kit layout
1
3.
Initial Board Configuration
2
4.
PC Graphical User Interface (GUI) Software Installation
3
5.
Installing USB Drivers
4
6.
Using the Graphical User Interface (GUI)
4
7.
Additional material
6
8.
Support
6
1.
Introduction
Welcome to the Renesas ASSP EASY Motor Control reference kit!
This quick start guide assists the user to connect and use the Renesas ASSP EASY Motor Control Kit for the first
time. The on-board ASSP internal flash memory is pre-programmed with a motor control project. Please check
the contents of the kit using the supplied package contents list and notify your supplier if any are missing.
Please note: no CD-ROM is provided in the kit.
PLEASE DO NOT CONNECT THE BOARD TO THE HOST PC BEFORE INSTRUCTED
2.
Kit layout
For further board details, please refer to the ASSP EASY Motor Control Solution User Manual.
ASSP EASY Motor
Control Board
PMS Motor
24Vdc, 2.5A
Power supply
Type C, USB cable
“Graphical User
Interface” SW
