background image

Safety Information

3

PLEASE READ THIS INSTRUCTION MANUAL BEFORE YOU BEGIN ASSEMBLY.  GREAT 

CARE HAS BEEN TAKEN TO DESIGN THESE INSTRUCTIONS AND FOLLOWING THEM 

WILL HELP YOU WITH QUICKER ASSEMBLY AND MINIMISE THE RISK OF INJURY

Safety Standards 

This Air Mag. M.W. meets the requirements of the EN ISO 20957-1: 2013, Class SA 

It is important that you keep these instructions for future reference.

This product is not suitable for therapeutic purposes.

YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY - 

THIS LIST IS NOT EXHAUSTIVE.
•  Always assemble and operate the product on a level surface, 

ensure that the product is stable before use.

•  Try to ensure that your back is straight while exercising, 

especially for long periods

•  The safety level of this equipment can only be maintained 

if it is regularly examined for wear and tear

•  Keep hands away from moving parts.
•  Replace defective components immediately, and/or 

keep the equipment out of use until it is repaired.

•  Use only the adjustment settings as described in the 

instructions.  Always use the correct adjustment pin/fixing.

•  Special attention should be taken to inspect the 

components, such as pulleys,  bearings, straps, rollers are 

always more susceptible to wear before use.

•  Never leave any adjustment devices projecting from the 

product.

•  Always wear suitable clothing and footwear e.g. tracksuit / 

shorts / training shoes

•  Remove all personal jewellery before exercising.
•  Ensure you warm-up well before using the equipment as 

this will help to prevent muscle strain.

•  After eating, allow 1-2 hours before exercising as this will 

help to prevent muscle strain.

•  Never overload the equipment – the maximum user weight 

of this ski is 180kg / 400lbs.

•  Don’t rock this equipment form side to side
•  Never use the equipment in any other manner other than 

the ways explained in these instructions and/or any  

wall-chart supplied.

•  This product has an intergrated resistance system without 

a constant power mode that is governed by magnetic 

resistance.

•  Losing grip or suddenly releasing the handle could result 

in an uncontrolled return, ensure there is free space around 

the product.

•  You may want to store this product away to save space - 

be aware of moving mechanical parts which could cause 

injury.

•  To prevent shock, keep all electical components, such as 

the console, motor, cord and switch away from water.

•  Do not use any accessories that aren’t specifically 

recommended by the manufacturer, these might cause 

injuries or cause the unit to fail.

•  Work within your recommended exercise level, do 

NOT

 

work to exhaustion.

•  If you  feel any pain or abnormal symptoms, 

STOP YOUR 

WORKOUT IMMEDIATELY

.  Consult your physician 

immediately.

•  Parents and others in charge of children should be aware 

of their responsibility, because the natural play instinct 

and the fondness of experimenting of children can lead to 

situations and behaviour for which the training equipment 

is not intended

•  If children are allowed to use the equipment, 

their mental and physical development and above all 

their temperament should be taken into account. They 

should be controlled and instructed in the correct use 

of the equipment.  

•  The equipment is under no circumstances 

suitable as a children’s toy.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety.

• 

The free area shall be not less than 0.6 m greater than 

the training area in the directions from which the 

equipment is accessed.

Injuries to health may result from incorrect or excessive training.

!

Heart Rate Monitoring System may be inaccurate, Over exercise may result in 

serious injury or death. If you feel faint stop exercising immediately ! 

Be aware of the edges on the platform when in use or move it around.

!

!

!

The safety maximum length of the pulling handle motion on this product is 200cm, 

please be awared to avoid any exercise that over this motion range limit.

It is your responsibility to contact us for further advices, when you found any damages which 

impact the original design and potential issue caused on the product after carton opened. 

!
!

The max. operating force allowed is 18 kg.

!

Содержание 702011

























Отзывы: