How To Attach the Air Mag M.W. II On Wall
11
The Air Mag M.W. II comes with pre-drilled holes brackets for a standard 16” on center stud wall construction and the hardware
is included for the attachment . For mounting to other types of wall construction ( metal , concrete etc. ),
it is your own
responsibilty and liability to consult with a building professional for safe and secure installation
.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!
The Air Mag M.W. II must be securely and reliably fastened to a solid wall.
!
1. Ask someone to assist you to fold up the whole main stem assembly, without the
Elastic Cord
&
Air Mag M.W.
attached, and
against onto the wall of the desired location vertically.
2. Line up the four fixing holes on the top bracket with the wall studs properly and also line up the four fixing holes on the
bottom bracket with the wall studs as well.
3. Mark each hole location of the top bracket and also mark each hole location where the
Air Mag M.W.
II bottom bracket lines
up with the wall ( left & right sides )
4. Fold down the
Main Stem Assembly
on floor carefully.
5. Drill a 1/4” diameter hole 2” deep at each mark on wall carefully.
6. Complete the
Elastic Cord
&
Air Mag M.W.
assembly properly.
7. Fold up the whole
Air Mag M.W. II
assembly & against to the wall and align four holes on the top bracket to holes on wall
carefully.
8. Fit the top bracket to the wall with four
5/16” Hex Head Lag Screws
&
Washers
and tight with 13/17 wrench -provided.
9. Line up the whole
Air Mag M.W. II
assembly and align four holes on the bottom bracket to holes on wall.
10. Fit the bottom bracket to the wall with four
5/16” Hex Head Lag Screws
&
Washers
and tight with 13/17 wrench -provided.
Installation Recommendations.
Dimensions ( without user ) : 49cm x 37cm x 209 cm
Training area : 60cm x 110cm x 215cm
Total Weight: 46.5 kg ( 101.5 lbs )
Installation Tools Needed :
1. 1/2” ( 13mm ) Wrench - Provided
2. Drill w/ 1/ 4” bit ( 6mm)
3. 5/16” Hex Head Lag Screw x 8 - Provided
4. 5/16” washer x 8 - Provided
5. When mounted properly, the lag screws and washers
will withstand 202kg ( 445 lbs ) of force.
Air Mag. M.W. II
Assembly
Bottom Wall
Mounting
Bracket
Top Wall
Mounting
Bracket
Drill w/ 1/ 4”
bit ( 6mm)
Be sure you are drilling into solid material and that the Air Mag M.W. II is firmly
attached to the wall … Insufficient attachment may lead to injury.
!
The minimun force supported shall be 202 kg.
!
