Rendamax R3456 EVO, Руководство пользователя, Страница: 27 / 72

Neutralisation
General
Neutralisation systems
Standard neutralisation system (DN)
Neutralisation system with pump (HN)
General
Condensate, created by the R3456
EVO, should be drained into the public
draining system. The condensate PH is
between 3.0 and 3.5. National and/or
local regulations have to be checked, in
order to find out whether the
condensate should be neutralised
before entering the public draining
Type DN2 DN3
Applicable for [kW] 450 1500
Length [mm] 420 640
Width [mm] 300 400
Height [mm] 240 240
Type HN 1.5 HN 2.5
Applicable for [kW] 280 540
Length [mm] 410 640
Width [mm] 300 400
Height [mm] 290 240
Power
consumption
pump
[W] 40 150
Pump head [m] 6 3
Neutralisation systems
The neutralisation systems can be
placed in the bottom section of the
boiler. The delivery of the system
contains the following components:

Granulate for first filling

Connection hoses for inlet and outlet
connection

Boiler connection adapter
For the neutralisation two different
systems are available:
Standard neutralisation system (DN)
The standard neutralisation system is used, when the public draining connection is
at lower level than the boiler syphon connection.
Neutralisation system with pump (HN)
The neutralisation system with pump is used, when the public draining system is at higher level than the boiler syphon
connection and the condensate needs to be transported to a higher level before draining is possible. The built-in pump of the
neutralisation system takes care of the transport of the condensate.
The maximum amount of condensate
for each boiler type can be found in the
chapter „Technical data“.
26