Rendamax E8.1121, Руководство по эксплуатации, Страница: 8 / 44

Operation
Changing the settings
Changing the settings
Areas
General
Value selection summary
Service => for service engineers
Date / Time / Holiday => for users
Display
System value display (e.g. sensor
values and setpoints). No adjustments
can be made. Operating errors are
therefore excluded in this area.
Users
Summary of settings that can be made
by the operator.
Time programs
Summary of time programs for heating
circuits, the hot water circuit and
possibly the circulation pump
Expert
Summary of values for which expert
knowledge is required to make settings
(installation technician).
E
Making incorrect settings in the
expert level can cause damage to
the system or the property that is
being heated. => The values in the
expert level are protected by a
code number.
Levels
The settings in the different areas are
sorted into operating levels
- INSTALLATION
- HOT
WATER
- HEATING CIRCUIT I
- HEAT CIRCUIT II
INSTALLATION
All display values and settings that
relate to the heat generator or the
entire system and cannot be assigned
to a consumer circuit.
Hot water
All display values and settings that
affect
central hot water preparation
and circulation.
Heat circuit I / II
All display values and settings that
relate to the associated consumer
circuit.
When heat circuit II is being configured
as a hot water circuit, for example, the
settings for this distributed hot water
circuit can be found in the "Heat circuit
II" operating level.
!
An overview of all settings can be
found on the following pages.
8