rev04
6
1. INTRODUCTION
Your vehicle is
fi
tted with an original protection system against intrusion attempts, controlled via remote control of your vehicle.
This device ensures complete protection:
1 anti-lifting protection against attempt of theft of tyres/rims and vehicle removal;
2 shock detection;
3 connection wiring protection (anti-sabotage);
4 protection against engine start-up attempts;
5 Panic function.
2. ARMING/DISARMING OF THE SECURITY SYSTEM
2.1. Arming/disarming without Main-libre function (use of the remote control)
To activate the system, press push-button n. 1 of the transmitter once.
Arming is con
fi
rmed by:
• Three short
fl
ashes of the turn indicators.
• Three sharp sound signals (if this function is enabled – see paragraph 13)
• The dashboard LED lights up.
The LED remains on with constant light for about 60 s. This is the arming period, which allows for the stabilisation of the control unit (
fi
rst 20
s) and subsequently for the testing of the functions (40 s) – see paragraph 8, “Check control function”.
Once this period has elapsed, the LED starts
fl
ashing, to indicate that the system is fully active.
To deactivate the system press push-button n. 1 of the transmitter once.
Disarming is con
fi
rmed by:
• A long
fl
ash of the turn indicators (*)
• A deep sound signal (if this function is enabled – see paragraph 13)
• The dashboard LED extinguishes.
(*) A short additional
fl
ash indicates that the transmitter battery is getting
fl
at and needs replacement.
Operating instructions
