clé d’enjoliveur .......................................... (jusqu’à la fin de l’UD)
crevaison .................................................. (jusqu’à la fin de l’UD)
levage du véhicule
Changement de roue .......................... (jusqu’à la fin de l’UD)
enjoliveurs ................................................ (jusqu’à la fin de l’UD)
5.4
ENG_UD265_1
Enjoliveurs - Jantes (S65 - B65 - C65 - Renault)
ENG_NU_778-2_NU_Renault_5
Enjoliveurs – Jantes
WHEEL TRIM – WHEELS
Wheel trim with concealed
wheel bolts
(e.g.: wheel trim
1
)
Remove it using a hubcap tool
3
(stored
in the tool kit) or the end of the wheel-
brace, inserting the hook into one of the
slots around the edge.
To refit it, align it with valve
2
.
Push the retaining hooks in fully, start-
ing with side
A
near the valve, followed
by
B
and
C
, finishing at
D
opposite the
valve.
Central wheel trim
(e.g.: wheel trim
4
)
Remove it using the hubcap tool (in the
glove box) by inserting tool
5
into re-
cess
6
.
To refit the wheel trim, align recess
6
with the wheel rim, clip the wheel trim
back in place and use tool
5
to tighten
the nut.
We would advise you to note the
number engraved on the tool so that
you can replace it if it is lost.
B
1
D
C
A
2
6
5
4
3